Skip to main content
Investigate native pin and clock configuration without inventing hardware facts.

​
Before you start

Native configuration sources and the exact board/device documentation.

​
Workflow

Inspect the project configuration and available pin/clock views. Trace displayed values back to source. Edit the owning SDK/Cube/Devicetree configuration and regenerate/rebuild through the native workflow where required.

​
Interpret the result

A diagram or calculated value is not proof of board wiring or measured frequency. Not every vendor format is editable through these views. For an unexplained result, preserve the source/configuration and observation together. Use Diagnose a failure to turn it into a reproducible investigation. Check support boundaries before assuming a vendor-specific operation is implemented.